BLAUPUNKT MP 68 32-Bit Optical-in 8 Channel Digital Signal Processor DSP
- Stock: In Stock
- Reward Points: 19
- Model: MP 68
- Weight: 3,000.00g
- SKU: MP 68
Get engaged with high fidelity and tremendous audio processing signature of Blaupunkt new take in Velocity Power MP 68, the Digital Signal Processor with high level impedance input.
MP 68 processor gives you a maximization of sound output with selected features that lets you listen to great music. DSP featuring MP 68 allows you to maximize the audio performance system by establishing a connection between the source unit and the amplifier. The greatness of audio signal output can be viewed or monitored from the source unit that goes into the Digital Signal Processor (DSP). It does not stop there, then the signal is sent to the amplifier. DSP can offer countless number of improvements with the signal before sending it to the amplifier, such as crossovers, equalizers, line output and converters. DSP converts all these units into one.
DSP offers perfect time alignment. Despite the speakers that are located at different distances in the vehicle, DSP is able to measure the distance from the listener or the driver to prevent skewed sound track and make sure all sound coming from the speakers are the same.
Specification
- Inputs : 6x RCA/Aux-in, 6 Highlevel Speaker Input, x Optical SPDIF (12 - 96kHz), 1x Remote-in, 1x COAX-in, 1x Aux-in (3.5mm JACK)
- Input sensitivity : RCA/Cinch 400mv 1x COXA-in, Highlevel 5 - 10 Volts or 10 - 20Volts
- Outputs : 8x RCA/Cinch, 1x Remote-out
- Output votlage RCA/Cinch : > 5 Volts RMS
- Frequency response : 20Hz - 22kHz
- DSP resolution : 32 bit
- DSP power : 295MHz (1.2 billion MAC operations/Second)
- Sampling rate : 48kHz
- Signal converters A/D : BurrBrown
- Signal converters D/A : BurrBrown
- Signal-to-noise ratio digital input : 105dB (A-weighted)
- Signal-to-noise ratio analog input : 100dB (A-weighted)
- Distortion (THD) : <0.015%
- Damping factor : >70
- Input impedance : 22kOhms
- Input impedance highlevel : 200Ohms
- Operating voltage : 9 - 15 Volts (max. 5 sec. down to 6 Volts)
- Additional features : Control Input, USB, HEC slot
- Dimensions (L x W x H) : 180 x 130 x 39mm
| DSP.Audio2 | |
| DSP.Audio2 | Audio:Filtering Linkwitz, Bessel and Butterworth |
| General | |
| Dimensions | 180mm (L) x 130mm (W) x 39mm (H) |
| DSP Processor | 32-bit |
| DSP Software | Windows PC |
| Remote Control | Included |
| Type | DSP |
| Warranty | 12 months by Blaupunkt |
| Input | |
| Aux | 1 x 3.5mm Stereo |
| Bluetooth | Yes (Optional module needed, sold separately) |
| High Level Speaker - Input | 6-channel |
| Impedance | 22kOhms |
| Low Level RCA - Input | 6-channel |
| Optical SPDIF | 1 |
| Output | |
| High Level Speaker - Output | None |
| Low Level RCA - Output | 8-channel (5V) |
| Power | |
| Fuse Rating | None |
| Operating Voltage | 9 - 15 Volts (max. 5 sec. down to 6 Volts) |
| Audio | |
| Frequency Response | 20Hz-22KHz |
| Signal-to-Noise Ratio | 105dB for digital input, 100dB for analog input |
| T.H.D. | 0.015% |
| Time Alignment | Yes |
