Menu
Your Cart

Alpine MRV-V500 Class-D 5 Channel Amplifier 40W x 4, 150W x 1 RMS at 4 ohms

Alpine MRV-V500 Class-D 5 Channel Amplifier 40W x 4, 150W x 1 RMS at 4 ohms
Alpine MRV-V500 Class-D 5 Channel Amplifier 40W x 4, 150W x 1 RMS at 4 ohms
Pre Order
Alpine MRV-V500 Class-D 5 Channel Amplifier 40W x 4, 150W x 1 RMS at 4 ohms
Alpine MRV-V500 Class-D 5 Channel Amplifier 40W x 4, 150W x 1 RMS at 4 ohms
Alpine MRV-V500 Class-D 5 Channel Amplifier 40W x 4, 150W x 1 RMS at 4 ohms
RM1,545.00
Price in reward points: 1545
  • Stock: Pre Order
  • Reward Points: 15
  • Model: MRV-V500
  • Weight: 3,100.00g
  • Dimensions: 30.00cm x 11.00cm x 29.00cm
  • SKU: MRV-V500
  • UPC: 495804372119

Alpine MRV-V500 Class-D 5 Channel Amplifier 40W x 4, 150W x 1 RMS at 4 ohms

 

Born Tough, Raised Strong

Tens of thousands have relied on V-Power amplifiers for dependable, quality power. Now in their fourth generation, V-Power amplifiers carry on this heritage and prove that playing strong never looked or sounded better. Yes, it is possible to improve upon a good thing.

PROVEN POWER

Each V-Power amplifier comes with its very own birth-sheet. V-Power amplifiers are tested and documented to show their true actual output.

RAISING THE BAR

The new V-Power products are now Class D digital amplifiers, resulting in a huge efficiency gain versus their predecessors without draining your battery or your pockets. Class-D provides continuous clean power to your speakers, operating at 80% efficiency far greater than conventional Class A or B amplifiers. Translation: Enjoy cleaner bass, even during extreme power demands.


BIG POWER, SMALL PACKAGE

V-Power amplifiers are known for their compact size, but don’t underestimate their power capacity. Although they have a 40% smaller footprint than their predecessors, they produce the same amount of power as before. Get the power you need, even if you have limited installation space.

NON SHUT-DOWN DESIGN

Even if you pound your music for a long time, these amps won’t shut down. They use a Thermal Management Processor to make sure the heat level never gets too high. No distortion, no interruptions!


DUAL FEEDBACK MODULATION

Dual internal error correction technology – which had previously only been available in the PDX and X-Power amplifiers, is now integrated in V-Power mono amplifiers. The audio input signal is analysed, compared, and corrected twice dynamically as the signal is processed through the amplifier. The result is amplifiers with the widest frequency response, higher damping factor, and lowest noise in its class.

EXCEPTIONALLY SIMPLE SOUND UPGRADE

The V-Power's 4-channel speaker level inputs connect directly to any head unit, without the need for external converters. This makes the V-Power amplifiers ideal for upgrading factory and aftermarket systems. The flush mount controls make for easy installation. The terminal covers conveniently snap-on without the need for additional tools, to protect the wiring connections while creating a clean, finished appearance.


REMOTE BASS LELVEL ADJUSTMENT

The MRV-M500 and MRV-M250 mono models are compatible with the RUX-KNOB remote bass knob (sold separately). Use theRUX-KNOB to conveniently adjust bass levels from your dash.

 

Specifications

GENERAL

  • Amplifier Type: Class-D (Digital)
  • Channel Design: 5 Channel
  • Power Supply Design: DC-DC PWM Power Supply
  • Pre-Amp Stage: Discrete
  • Final Outputs: Power MOSFET
  • Crossover: Variable Lowpass & Highpass Filter
  • Gain Control: Continuously Adjustable Gain Control
  • Bass EQ: Bass EQ Function
  • Remote Turn On: Remote Sensing Function (for RCA Input & Speaker Input)
  • Current Protection: Over-Current, Over-Voltage, Under-Voltage and Thermal Protection
  • Board Circuitry: S.T.A.R. Circuit
    Speaker-Level Inputs: 4-channel Speaker Level Inputs
  • Power Indicator: Top Mounted Blue LED Power Indicator
  • Thermal Control: Multi-stage Power Limits
  • Power Supply: MOSFET
  • Power Requirements: 14.4 V.DC (11-16V allowable)I
  • nput Sensitivity (RCA Input): 0.2 - 4.0 V
  • Input Impedance: >10k ohms
  • Damping Factor (10W into 4 Ohms at 100Hz): >90 (Ch 1-4), >500 (Subwoofer)
  • Signal to Noise (1W into 4 Ohms): >81 dBS
  • ignal to Noise (Rated Power into 4 Ohms): >98 dB
  • Remote Level: -20 to 0 dBs


INSTALL

  • Terminal Layout: Two-Sided
  • Screw Mount / Wire Cover: Integrated Wire and Mounting Screw Terminals


RMS POWER RATINGS

  • Per channel into 4 Ohms: 40W x 4 + 150 x 1 RMS(14.4V at >1% THD+N)
  • Per channel into 2 Ohms: 60W x 4 + 1 x 250 RMS (14.4V at >1% THD+N)


SOUND TUNING

  • Crossover Frequency (CH1/2/3/4, LPF): 50 - 400 Hz, -24dB/oct.
  • Crossover Frequency (Subwoofer, LPF): 50 - 400 Hz, -24dB/oct.
  • EQ (Equalizer): 0 to +12dB, fc=50Hz


DIMENSIONS

  • Foot Print (WxHxD) mm: 200 x 55 x 200 mm
  • Heat Sink (WxHxD) mm: 244.5 x 55 x 219 mm

Write a review

Note: HTML is not translated!
Bad Good
Tags: MRVV500