Audio & Video
Brand: 12VOLTS
TOYOTA VIOS '13-'16 PIANO BLACK (C) AL-TO 075 Car Stereo Installation Dash Kit for installing aftermarket car stereo systems..
RM145.00
Brand: 12VOLTS
TOYOTA YARIS '05-'09 (C) AL-TO 023 Car Stereo Installation Dash Kit for installing aftermarket car stereo systems..
RM195.00
Brand: 12VOLTS
Toyota 200mm to Single Din Pocket for Car Stereo Installation for installing aftermarket single din car stereo systems..
RM50.00
-14 %
Brand: VENOM
Specification Woofer Cone Material : Rubber + Carbon Filter Cotton Impedance : 2.8 ohms Rated Power Input : 30W Maximum Power Input : 50W Frequency Range : 50–6000Hz Sensitivity 1w /1m : 88 db Voice coil : 1 inch ASV / EISV Weight(1 pcs) : 1.02 K..
RM799.00 RM925.00
Hot
Brand: YAC
VP-72 Tech Vision Monitor Visor Shade for 5.8" - 8" LCD Monitors to Reduce Glare Even the best monitors in the market can't totally avoid the glare from the sun. This is a great solution that will help you better see, use and enjoy your in-car monitors. Adjustable width from 5.8" to 8"..
RM65.00
Brand: Audiolab
When installing aftermarket head units, you will be required to make the connection between the OE harness from the vehicle to the aftermarket leads on the stereo. Usually, you will need to cut the original harness on your car in order to do the wiring to the stereo. However, with the harness adapte..
RM28.00
Brand: Audiolab
When installing aftermarket head units, you will be required to make the connection between the OE harness from the vehicle to the aftermarket leads on the stereo. Usually, you will need to cut the original harness on your car in order to do the wiring to the stereo. However, with the harness adapte..
RM7.00
Brand: Audiolab
When installing aftermarket head units, you will be required to make the connection between the OE harness from the vehicle to the aftermarket leads on the stereo. Usually, you will need to cut the original harness on your car in order to do the wiring to the stereo. However, with the harness adapte..
RM7.00
Brand: Audiolab
When installing aftermarket head units, you will be required to make the connection between the OE harness from the vehicle to the aftermarket leads on the stereo. Usually, you will need to cut the original harness on your car in order to do the wiring to the stereo. However, with the harness adapte..
RM28.00
Brand: 12VOLTS
If you're planning to install an aftermarket head unit to replace your factory head unit, you will need a dash kit that allows for this. Be sure to also look into the necessary harness adapters, antenna adapters and steering wheel control socket adapters required...
RM245.00
Brand: X Sound
Usage:For sound absorption and acoustic enhancements applicable on car doors, roofs, floors and boots.Specifications:Dimensions (mm): 950 x 500Thickness (mm): 18.0Weight (g): 440..
RM75.00
Brand: X Sound
Usage:Vibration and sound deadening specifically made for engine bays.Specifications:Dimensions (mm): 1,000 x 100Thickness (mm): 8Weight (g): 940..
RM480.00