DB Drive Speed Series SA600.4 Class AB 4 Channel Amplifier 4 x 60W RMS at 4 ohm

DB Drive SpeedSeries SA600.4 4 Channel Amplifier 4 x 60W RMS at 4 ohm

Amplifier DB Drive SA600.4 Class A / B 4 Channels 600w 2-Ohms . It has 12dB / 24dB Hi / Lo variable crossovers . EQ Bass Boost Variable 12dB, High Efficiency MOSFET Design . DC-DC PWM power supply, DC protection circuit, direct speaker terminals and power cable . Its dimensions are 45x22x5cm

FEATURES

• Class A/B Circuitry
• 2 Ω stereo capability
• Audiophile grade components
• Continuously Variable Selectable 12dB/24dB per Octave high pass and Lowpass/Bandpass X-Over Channels
• Continuously variable 12dB Boost on Bass EQ
• Buffered pre-amp input circuitry
• High effeciency MOSFET design
• Variable input level control
• DC-DC PWM power supply
• DC short circuit protection
• Direct-connect integrated speaker and power wire terminals
• Bandwidth : 20 - 28 KHz

SPECIFICATIONS

• Rated Power @ 14.4 Volts - 4 X 60 Watts @ 4 Ω Stereo
• Rated Power @ 14.4 Volts - 4 X 140 Watts @ 2 Ω Stereo
• Rated Power @ 14.4 Volts - 2 X 240 Watts @ 4 Ω Bridged
• X-Over Slope : 12/24 dB
• Bass Boost @ : 45Hz
• Input Sensitivity : 285Mv - 6V
• Signal to Noise Ratio : 95 dB
• THD at rated power : 0.5%
• Length : 12.99"
• Width : 9.33"
• Height : 2.17"